Samsung Dome; Reference Material And Documents; Connection; Setup - Eneo EKR-KB1 Betriebsanleitung

6.14 Samsung Dome

6.14.1 Reference m aterial and documents
Dome Samsung SCC-641
Dome Samsung SCC-643P
Samsung Protocol

6.14.2 Connection

6.14.2.1 Cable
6.14.2.2 Dome setting s
Dome ID-number must be set according to the respective installation manual.
Baudrate can be selected among the following values: 4800, 9600 (default), 19200, 38400 baud.
For the Dome SCC-643 configure the mode FULL DUPLEX. Should the system require it, there can be
configured the mode HALF DUPLEX: in this case the connection is the same as for the Dome SCC-641, on the
poles Txd+ and Txd-.
6.14.2.3 Keyboard set tings
During Keyboard setup, submenu





6.14.3 Setup

Dome setup is mostly carried out by On Screen Menu.
Some parameters can be set up by pressing a combination of keys or by inserting a special code.
For all setup operations the keyboard must be enabled to perform the receiver setup (menu

SCC-641
White RS485A
Yellow RS485B
SCC-643
White
RS485A
Yellow RS485B

Baudrate must be equal to the one selected for the dome.
Page 94
Txd +
Txd -
Rxd +
Rxd –
).
, must be suitably set:
MNNCEKRKB1_0439