6.8.4 Autopan
: autopan on
: stop autopan
: autopan setup, by entering a special menu:
Note: preset positions 63 and 64 represent the autopan limits.
6.8.5 Preset, sca n, home
( 1÷64): store the current position as preset position number X
( 1÷64): movement towards the previously stored preset position X
: setup preset, by entering a special menu
: movement towards the Home position (position 1).
: setup parking time, by entering a special menu:
6.8.6 Patrol
The Eneo pan & tilt has two types of patrol: standard patrol and random patrol.
6.8.6.1 Standard Pat rol
: start standard patrol
: end standard patrol
: setup standard patrol, by entering a special menu
Select autopan speed and dwell time and insert a value
within the allowed range.
The speed can vary from 1 (minimum) to 255 (maximum).
Time is expressed in minutes. 255 allows the autopan to
stay on without time limits.
Insert a value within the allowed range.
The speed can vary from 1 (minimum) to 255 (maximum).
Insert a value within the allowed range.
The time is expressed in minutes.
Select the various items and insert the values within the
allowed range.
indicates the series of consecutive
positions for the patrol
: movement speed from 1 (minimum) to 255
(maximum)
: length of pause on reaching a position
Page 76
MNNCEKRKB1_0439