6.9 Ernitec Sa turn Dome
6.9.1 Reference m aterial and documents
Dome Ernitec Saturn
ICU Installation Instruction, Manual No.3040-00014, Rev.980220
6.9.2 Connection
6.9.2.1 Cable
6.9.2.2 Dome setting s
Dome ID-number must be set according to the respective installation manual.
Baudrate can be selected among the following values: 1200, 2400 (default), 4800, 9600, 19200 baud.
6.9.2.3 Keyboard set tings
During Keyboard setup, submenu
6.9.3 Setup
Dome setup is mostly carried out by On Screen Menu.
Some parameters can be set up by pressing a combination of keys or by inserting a special code.
For all setup operations the keyboard must be enabled to perform the receiver setup (menu
White
RS485A
Yellow
RS485B
Baudrate must be equal to the one selected for the dome.
Page 78
Rx+
Rx-
must be suitably set:
MNNCEKRKB1_0439