Star Dome; Reference Material And Documents; Connection; Preset, Scan, Home - Eneo EKR-KB1 Betriebsanleitung

6.17 Star Dom e
6.17.1 Reference m aterial and documents
Dome Star SMD
MD200 Series Control Command Reference, rev.2.02, September 1, 1999

6.17.2 Connection

6.17.2.1 Cable
6.17.2.2 Dome setting s
Dome ID-number must be set according to the respective installation manual.
6.17.2.3 Keyboard set tings
During Keyboard setup, submenu




6.17.3 Preset, sca n, home

(0÷63): store the present position as preset position number X


(0÷63): movement towards previously stored position X

: movement towards the Home position
6.17.4 Autopan, p atrol, tour
For the Star dome, the autopan and patrol functions are called swing and group respectively. In addition,
autopan can be of the horizontal type (Pan Swing) or vertical (Tilt Swing).
Swing is a movement between the horizontal or vertical limits of two preset positions.
Group is a continuous movement between as series of preset positions.
Tour is used to join different groups into a single sequence of positions.
White
Yellow

Baudrate is fixed (9600 baud).
(0÷63): erase preset position number X
RS485A Data +
RS485B Data -
Page 102
must be suitably set:
MNNCEKRKB1_0439