Configuration; Dedicated Functions - Eneo EKR-KB1 Betriebsanleitung

5.19.4 Configurati on
The multiplexer is configured by On Screen Menu. Refer to the corresponding manual for an explanation of the
various configuration items.
The multiplexer should be configured for RS485 type communication, with an appropriate identification address
and baud rate.
5.19.4.1 OSM Configu ration
Connect the multiplexer directly to the keyboard and a monitor to the MONITOR 1 output.

starts multiplexer configuration.
The multiplexer shows the on screen menu; the keyboard display indicates the mode change:



 
/ : increase and decrease the selected value

start and end of the configuration

equivalent to the NEXT key

equivalent to the BACK key

exits the special mode of configuration

Joystick : movement within the menus.
5.19.5 Dedicated F unctions
As well as the normal procedure for selecting input videos, the Sanyo multiplexer is provided with numerous
other functions that are activated by pressing key combinations corresponding to the keys on the multiplexer's
local keypad.

The key is used to change the number of the unit responding to the command.
 
c ontrol of the master monitor
   
,
5.19.5.1 Multiplexer fu nctions

•
multi

•
quad

•
plus

•
still

•
live

•
vcr
5.19.5.2 Other functio ns

•
sequence

•
reset alarms
    
, , c ontrol of one spot monitor
Page 58

MNNCEKRKB1_0439