Sensormatic / American Dynamics Dome; Reference Material And Documents; Connection; Setup - Eneo EKR-KB1 Betriebsanleitung

6.16 Sensorma tic / American Dynamics Dome
6.16.1 Reference m aterial and documents
Dome Sensormatic DeltaDome II
Rs-422/RS-485 Communication Protocols, 8000-2694-01, Rev.A

6.16.2 Connection

6.16.2.1 Cable
6.16.2.2 Dome setting s
Dome ID-number must be set according to the respective installation manual.
6.16.2.3 Keyboard set tings
During Keyboard setup, submenu





6.16.3 Setup

Dome setup is mostly carried out by On Screen Menu.
Some parameters can be set up by pressing a combination of keys or by inserting a special code.
For all setup operations the keyboard must be enabled to perform the receiver setup (menu

6.16.3.1 OSM Setup
Connect the dome directly to the keyboard and a monitor to the dome video outlet.
The EKR-KB1 keyboard enter in special mode during the dome setup.

start dome setup
The dome show the On Screen Menu; the keyboard shows the change mode in the display:




setup end

Joystick : cursor movement within the menus
    
or /
  
or to increase a value; cursor to the right in text definitions
White
Yellow

Baudrate is fixed (4800 baud).
: select the submenus
RS485A RX +
RS485B RX -
).
Page 99
must be suitably set:
MNNCEKRKB1_0439