Video Matrix Videotec Sm84A And Sm164A; Description; Connexion; Video Device Setup - Eneo EKR-KB1 Betriebsanleitung

5.6 Video ma trix Videotec SM84A and SM164A

5.6.1 Description

Matrix SM84A and SM164A are products for professional use in applications for security and surveillance and
dedicated to the management of video signals. The SM84A and SM164A models differ only in the number of
possible video input connections, 8 and 16 respectively; there are four video outputs, one of which can be
managed directly by a VCR.
As well as the usual switching, alarm management and on screen menu programming operations, the SM84A
and SM164A matrix is equipped with an optional auxiliary line that can be used to control the telemetry or
multiplexer units. Refer to the matrix manual for further information on this subject.

5.6.2 Connexion

5.6.2.1 Cable
The communication cable is standard, as described in § 3.3 - Standard connection cable, page 12.
5.6.2.2 Matrix setting s
The new generation matrix SM84A and SM164A can be controlled by different types of keyboard and therefore
emulates the respective protocols: to control the switcher with the EKR-KB1 keyboard the MACRO protocol with
baud rate 38400 should be used.
Set the dip switches in the matrix as required (all dips are OFF: MACRO Protocol, baud rate 38400,
programming disabled).
5.6.2.3 Keyboard set tings
While the keyboard is being set up, the
follows:








The presence of a maximum of four keyboards connected to the matrix means it is necessary to define a
different identification number for each one (from 1 to 4).
5.6.2.4 Operational t est
If the keyboard is connected directly with the switcher set up in this way using the telephone cable supplied, it
should be possible to switch the input videos immediately:

• press

• press
5.6.3 Video devic e setup
The setup procedure is described in the video device's instruction manual.

Press to enter setup, and insert setup password if it has been enabled.

Control of a SM84A matrix
Control of a SM164A matrix
to select monitor 1

, , to select the cameras.
Page 32
submenu should be set as
MNNCEKRKB1_0439