Other Functions; Speed Factors - Eneo EKR-KB1 Betriebsanleitung

6.13.9 Other functi ons

: autoflip

: clean screen



White balance:
Back Light Compensation:

: enable "device phase delay mode"

(0÷3): set zoom speed








Note *) after the code has been inserted, a value between o and 40000 will be requested. Its meaning is
described in the dome user's manual.
6.13.10 Speed Fact ors
Protocol Pelco D is used in a wide range of domes and receivers. These objects don't move at the same speed
and it can be useful to change speed factors when speeds are too high or movement is not smooth enough.
It is recommended to try the four available speed factors and then choose the one that allows better
movements:

: first speed factor

: second speed factor

: third speed factor

: forth speed factor.
: reset camera remote (pan/tilt)
: reset camera remote (default values)

on,

on,
(0÷3): set focus speed
: shutter speed*
: line lock level*
: adjust white balance R-B *
: adjust white balance M-G *
: gain*
: autoiris level*
: autoiris peak*
off

off
Page 93 MNNCEKRKB1_0439