Preset, Scan, Home; Autoscan, Patrol And Pattern - Eneo EKR-KB1 Betriebsanleitung

The ESC key required by dome configuration procedure is replaced by the
Important note! When exiting dome configuration it is necessary to press
operation.

Joystick : cursor movement within the menus

: replaces the CTRL key.

: replaces the ESC key.

: replaces the TOUR key.

: replaces the PATTERN key.

: corresponds to the HOME key.

: corresponds to the MENU key.

: accepts and ends changes to an identification text.
 
: change identification texts.
Within the menu, pan & tilt movements are often required.
In this case keep the
 
: Pan & Tilt control.
 
: zoom control.
     
,
   
,
Some dome configuration short cuts (such as direct entry to the PRESET menu by pressing the
not been implemented because they can be recalled from the main menu.
6.7.4 Preset, sca n, home

(1÷240): store the current position as preset position number X

(1÷240): delete preset position number X

(1÷240): movement towards previously stored position X

: movement towards the Home position
6.7.5 Autoscan, P atrol and Pattern
The dome has 8 Autoscan layouts, 8 Tours and 4 Patterns, configured by On Screen Menu.

(1÷8): start autoscan X

(1÷8): start tour X

(1÷4): start pattern X

key pressed down and only release it when the movement is completed:
: focus control.
: iris control.
Page 74

key.


t o return the keyboard to normal
MNNCEKRKB1_0439

key) have