Preset, Scan, Home; Patrol - Eneo EKR-KB1 Betriebsanleitung

6.21.6 Preset, sca n, home

(1÷99): store the present position as preset position number X


: erase all preset positions

(1÷99): movement towards previously stored preset position X

: movement towards the Home position

: store the present position as the "home position"

: erase the home position.

6.21.7 Patrol

The patrol sequence consists of a series of preset positions that are shown one after the other, with a fixed
dwell time when each position is reached. The Macro protocol allows the management of two types of patrol:
standard patrol and extended patrol.
6.21.7.1 Standard patr ol
The standard patrol is the same as that described in see § 6.20.5 - Patrol, page 111.

activate/deactivate standard patrol (toggle)

configure standard patrol

standard patrol on

standard patrol off
6.21.7.2 Extended pat rol
Extended patrol allows the management of 99 preset positions with different individual dwell times. It is only
available on some receiver models that use the Macro protocol and have the preset functions.

activate/deactivate extended patrol (toggle)

extended patrol on

extended patrol off

extended patrol setup
When the keys are pressed the display shows a menu for modifying the extended patrol:











( 1÷99): erase preset position number X
Select "Positions" to define the patrol sequence.
Insert
the patrol sequence consists of all the positions between these two
ends, and they are recalled one after the other
Select "Default dwell time" if the same dwell time is to be used for all
positions:
the previously set individual pause times will be erased.
the first and last
Page 113
position of the patrol
MNNCEKRKB1_0439
sequence: