Autopan; Preset, Home, Scan - Eneo EKR-KB1 Betriebsanleitung


Joystick : for shifting the cursor within the menus and for the dome movement
Special commands for some submenus, as described in the dome instruction manual:

Joystick : zoom tele and zoom wide
 
e : focus near and focus far

: Home key


remove insertion.

6.10.4 Autopan


: start autopan

: stop autopan; if the autopan function is active the dome will not respond to other commands until it has been
stopped

: store the present position as the first limit switch

: show the position of the first stored limit switch

: store the present position as the second limit switch

: show the position of the second stored limit switch
6.10.5 Preset, hom e, scan
 
( 1÷63): store the present position as preset position number X
  

: erase all previously stored preset and home positions

: movement towards the Home position

: store present position as Home position

: erase previously stored Home position
  
( 1÷63): movement towards preset position X
(1÷63): corresponding to the keys Pos1-Pos63, when a position insertion is required;
( 1÷63): erase previously stored preset position number X
Page 82 MNNCEKRKB1_0439