6.10 JVC TK-C 675 Dome
6.10.1 Reference m aterial and documents
Dome JVC TK-C675
TK-C675 Programmer's manual, version 1.00/Feb.1998
TK-C675/C675B Programmer's manual (supplement), version 0.01/Dec.1998
JVC CCTV Serial Communication Protocol, Basic Protocol Reference, version 2, Jan.1998
6.10.2 Connection
6.10.2.1 Cable
6.10.2.2 Dome setting s
Dome ID-number must be set according to the respective installation manual.
Protocol must be set as Multidrop/Simplex.
6.10.2.3 Keyboard set tings
During Keyboard setup, submenu
6.10.3 Setup
Dome setup is mostly carried out by On Screen Menu.
Some parameters can be set up by pressing a combination of keys or by inserting a special code.
For all setup operations the keyboard must be enabled to perform the receiver setup (menu
6.10.3.1 OSM setup
Connect the dome directly to the keyboard and a monitor to the dome video outlet
: start dome setup
The dome shows the menu on video; the keyboard shows the mode change on the display:
setup end
corresponds to Set key shown in the dome instruction manual, to enter the submenu
allows the exit from submenu
White
RS485A
Yellow
RS485B
Baudrate is fixed (9600 baud).
Page 81
Rx +
Rx -
must be suitably set:
).
MNNCEKRKB1_0439