Everfocus Dvr; Description; Connections; Dvr Configuration - Eneo EKR-KB1 Betriebsanleitung

5.20 Everfocus DVR

5.20.1 Description

Everfocus Digital Video Recorders (EDSR400, EDSR100, EDSR900, EDSR1600 and the respective H
versions) are professional devices used to record video signals. Each video input provides a videoloop. Each
unit features a main video output and a call video output.
Communication from keyboard to DVR is monodirectional.
5.20.2 Connection s
5.20.2.1 Cable
5.20.2.2 DVR settings
Using the local DVR keyboard set the communication baudrate and a proper ID number in RS232/RS485
SETTING MENU. Only RS485 parameters have to be considered: set STOP BIT 1, parity NONE, data bit 8.
5.20.2.3 Keyboard set tings
During keyboard setup, submenu




5.20.2.4 Operational t est
When the keyboard is connected directly to the DVR, using a cable as shown above, it should be immediately
possible to switch video channels:
DEVICE

• push [
CH
 
• push [
]
5.20.3 DVR Config uration
The DVR is configured by On Screen Menu. Refer to the corresponding manual for an explanation of the
various configuration items.
Configuration controlled by a remote keyboard is allowed only in DVR mode, pushing [
RJjack1
EKR-KB1
RS485A
RS485B

Select the proper baudrate and DVR model.
] and choose a DVR number
CH
 
, [ ] to select a video channel (confirm with
L=1200 m
RJjack2
RJjack 1 RJjack 2
white yellow
yellow black
Page 60
DVR
RS485A
RS485B
must be suitably set:

when required)
MENU

MNNCEKRKB1_0439
].