Direct Setup - Eneo EKR-KB1 Betriebsanleitung

6.6.3.1 OSM Setup
Connect the dome directly to the keyboard and connect a monitor to the dome video outlet.
The EKR-KB1 keyboard enters special mode while the dome is being set up. When
time, the keyboard is reset to normal operation.

starts dome setup.
The dome shows the menu on video; the keyboard shows the mode change on the display:




end setup
 
enter submenu

Joystick : shifts the cursor within the menus

Joystick : changes the value shown by the cursor.
When dome movement is required in OSM mode, the

moved .
Activation of Zoom Tele and Zoom Wide, when required, is obtained by rotating the joystick

6.6.3.2 Direct setup

Some parameters can be set up by pressing the keys or inserting a special code:

Line lock phase:
Automatic autoflip:

Zoom speed:
Pan speed proportional to thezoom:

Digital zoom:

Focus speed:

Autofocus: on/off (toggle),

Autoiris : on

increase, decrease.

enable,
(1÷4); slow zoom (X = 1), fast zoom (X = 4)

disabledd,
(1÷4); focus slow (X = 1), focus fast (X = 4)


key should be held down while the joystick is being

enabled,

off
Page 71

is pressed for the first
disable

d isabled
(2÷8) enabled 2x÷8x
MNNCEKRKB1_0439

.