Second Function Keys; Dip Switch - Eneo EKR-KB1 Betriebsanleitung

2.4 Second fu nction keys

Some keys ( ,
keys.

For example,
The keys can be released in any order.
2.5 Dip switc h
The back of the keyboard has a set of dip-switches that are used to insert/remove the load of the RS485 lines
and block keyboard programming from the PC. Refer to § 3.1 - Video and telemetry lines, page 11, for further
information about inserting the line loads.
 
, ) can be used to activate second functions if pressed simultaneously with other
means: press the
DIP4: load on Video line
DIP3: load on Telemetry B line
DIP2: load on Telemetry A line
DIP1: internal firmware update

key followed by the
Page 10
 
key, keeping
ON: load inserted
OFF: load removed
ON: load inserted
OFF: load removed
ON: load inserted
OFF: load removed
ON: update is possible
OFF: update is not possible
MNNCEKRKB1_0439
pressed down.