Inhaltsverzeichnis
Werbung
7. Overfill protection devices
If overfill protection devices or limit indicators are
required for filling stations intended for storage of
fluids that pose a risk to watercourses in accord-
ance with applicable law, they may be equipped as
follows:
7.1
CUBEtanksforstorageofdiesel
fuel
CUBE tanks have been fitted with an approved
overfill protection device (limit indicator). The instal-
lation guide is included with the tank documents.
7.2
CUBEtanksforstorageoflubri-
cantsandpureureasolution
32.5%(e.g.AdBlue®)
CUBE tanks have been fitted with an approved
overfill protection device with warning system. The
installation guide is included with the tank docu-
ments.
7.3
CUBEtanksforstorageofother
media
CUBE tanks are to be fitted with an approved
overfill protection device with warning system. The
installation guide must be followed.
8. Warranty
We guarantee the product with regard to the dura-
bility of the material and problem-free handling in
accordance with the CEMO guarantee conditions.
Claims under the guarantee shall only be accepted
on condition that the above transport, installation
and user manuals, as well as all applicable regula-
tions, are carefully complied with.
9. Acceptance test certificate
Acceptancetestcer-
tificate
inaccordancewithDINEN
102043.1
forCUBEtanks
made of polyethylene (LLD-PE) for the non-pressurised
storage of media in accordance with the General
Technical Approval Z-40.21-589 and EN 13341.
Tank capacity:
Year of manufacture:
Manufacture no:
We certify that the container was successfully tested
in accordance with the requirements of the General
Technical Approval Z-40.21-589 and EN 13341, and
that the tank was manufactured in accordance with
the requirements of the General Technical Approval
Z-40.21-589 and EN 13341.
Factory inspector:
see reverse
CEMO GmbH
GB
980ltr
see reverse
see reverse
31
Werbung
Inhaltsverzeichnis
