Tralift Duratech
WLL* (t)
EN
Standard lifting height (m)
Minimum distance between hook H (mm)
Tensile load of hand chain at WLL* (daN)
Number of hand chains
Number of falls (load chain)
Dimensions Ø x P (see fig. 5) of load chain
Dimensions Ø x P (see fig. 5) of hand chain
Dimensions (mm) (fig. 1a)
Net weight (kg)
Additional weight by lifting m (kg)
Maximum lifting height (m)
Maximum lifting height (m) with chain bag option
: other lifting height available as standard: 6 m.
(1)
: for greater lifting heights, contact TRACTEL
(2)
: contact TRACTEL
(3)
: device hook
(5)
: lifting hook
(6)
Options:
- chain bag: load chain storage bag (See tables above.)
4. Installation
Before installing the Tralift or Tralift Duratech
hoist, make the following checks:
1. Check that the hoist is in good condition.
2. Check that the load to be lifted is below or
equal to the device's WLL*.
8
(1)
(2)
(3)
0.5
350
22
1
6 x 18
A
156
B
139
C
83.5
D
27
D
26
1
Ø
40
Ø
40
1
M
(fig. 6)
47.8
(5)
M
(fig. 6)
46.5
(6)
12.4
1.8
55
35
3. Check that the hooks (item 2, fig. 1 & 1a)
and the safety latches (item 6, fig. 1 & 1a)
are in good condition.
4. Check that the end of the load chain, slack
strand side, is secured to the low limit stop of
the hoist (item 4, fig. 1 & 1a).
5. Check that the markings comply with §10.
1
2
3
400
550
33
33
1
1
2
7 x 21
5 x 24
178
178
154
154
87
87
29
39
26
34
45
55
40
50
53.9
68.2
46.5
61.5
16.5
24.2
2.05
3.15
70
80
30
20