Storage; Troubleshooting; Decommissioning And Disassembly - Rohm RVM Originalbetriebsanleitung

10 | Storage

10 Storage
Pre-conditions:
▪ Personnel qualification: Trained/instructed person
▪ Wear personal protective equipment
▪ 5-axle clamp has been removed from the machine
▪ 5-axle clamp is clean
Procedure:
▪ The 5-axle clamp must be stored in a dry and protected place in ac-
cordance with the storage temperature (see Environmental and Operat-
ing Conditions).
NOTICE:
▪ Do not place the 5-axle clamp on protruding parts. Provide a support if
required.
11

Troubleshooting

NOTICE:
▪ Troubleshooting must be carried out by a skilled worker or specialist
personnel of RÖHM.
12

Decommissioning and disassembly

Pre-conditions:
▪ Personnel qualification: Skilled worker
▪ Wear personal protective equipment
▪ The machine is switched off and protected against being switched on
again
▪ The machine and 5-axle clamp have cooled down
▪ Machine and 5-axle clamp are cleaned
86 / 88 RVM DE-EN