Rohm RVM Originalbetriebsanleitung Seite 77

7.2.1 Removal of clamping jaws
Procedure:
1 Clamping jaw
1. According to the recess in the base jaw, insert the extraction tool
between the base jaw and the clamping jaw in the direction of the ar-
row.
NOTICE:
A screwdriver or similar tool can be used as an extraction tool.
2. Lever the clamping jaws out of the base jaws.
NOTICE:
Hold the clamping jaws with your hand while levering them out.
Ø The clamping jaws are removed.
RVM DE-EN
1 2
2 Base jaw
Operation | 7
EN
77 / 88