Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3 | Product description
Environmental and operating con-
ditions
Relative humidity (at 40 °C)
Potentially explosive environment
Ambient temperature at place of use +5 °C to +60 °C
Ambient temperature for transport
and storage
Dry and wet machining
Pollution of the machine's surroundings caused by the machine itself is per-
mitted. However, perfect operation of the 5-axle clamp must be checked
regularly.
3.2.7
Permissible operating materials
The following operating materials are permitted:
▪ Lubricant
which corresponds to the following quality requirements:
◦ Röhm F80 grease (recommended)
◦ or a comparable lubricant
NOTICE:
See data sheet Röhm F80 grease (the data sheet is available on request).
Other operating materials may only be used with prior written approval from
RÖHM.
3.3
Structural operating conditions
The following conditions must be adhered to for the proper operation of the
5-axle clamp in a machine:
▪ Before using the 5-axle clamp in a machine, it must be checked whether
the machine allows the use of the 5-axle clamp.
See also:
◦ Chapter "Obligations of the operator"
68 / 88
Quality requirement(s)
▪ max. 70 % outside of the work-
ing area
▪ max. 100 % within the working
area
NOTICE:
Use in very humid conditions leads
to faster corrosion and may reduce
the useful life.
No
-15 °C to +55 °C (for 24 h also up to
+70 °C)
Wet machining permitted with cool-
ing lubricants
RVM DE-EN
Werbung
