Cleaning; Cleaning The 5-Axle Clamp - Rohm RVM Originalbetriebsanleitung

8

Cleaning

Information for cleaning:
▪ It is preferable to use rags, cloths, fine brushes or brooms for cleaning.
▪ Do not use high-pressure cleaners, solvents, cleaning agents or chem-
icals for cleaning.
▪ Do not use creeping lubricants and preservatives for cleaning.
Activity

Cleaning the 5-axle clamp

▪ The machine is switched off and protected against being switched on
again
8.1 Cleaning the 5-axle clamp
Pre-conditions:
▪ Personnel qualification: Trained/instructed person
▪ Wear personal protective equipment
▪ The machine is switched off and protected against being switched on
again
▪ The machine and 5-axle clamp have cooled down
Procedure:
Ÿ Clean the 5-axle clamp.
RVM DE-EN
Interval (hours of operation or
after incident)
120 h or 1x weekly, more often if ne-
cessary
Cleaning | 8
EN
83 / 88