Rohm RVM Originalbetriebsanleitung Seite 82

7 | Operation
5. Screw the two turning bolts flush into the clampable base jaw.
NOTICE:
Threaded sleeve is locked.
6. Screw the spindle into the threaded sleeve until the O-ring is no longer
visible.
NOTICE:
The O-ring must be inserted at the spindle.
Ø The threaded sleeve is mounted.
7.6 Information on safe clamping of workpieces
82 / 88
Incorrect
One-sided clamp-
ing
Caution in the case of vertical use: Risk of injury due to
the workpiece falling out when loosening. Hold or sup-
port workpieces.
Correct
Central clamping
RVM DE-EN