Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2 | Safety
2.6.2
Risk of ejection, detachment and falling of components of the 5-axle
clamp
Description of the hazard:
In case of failure of components of the 5-axle clamp or non-compliance with
specifications of the 5-axle clamp (e.g. incorrect assembly, excessive
speed, excessive processing force, incorrect actuating force, insufficient
maintenance, wear, exceeding the service life), parts of the 5-axle clamp
can be ejected.
Avoiding the hazard:
▪ All information in the operating manual on the 5-axle clamp must be ob-
served.
▪ Carry out a risk assessment for the machine with the integrated 5-axle
clamp and implement the derived safety measures.
2.6.3
Risk of ejection, detachment and falling of workpieces from the 5-
axle clamp
Description of the hazard:
If the operating limits of the 5-axle clamp are not complied with (e.g. ex-
cessive speed, excessive processing force, incorrect selection of clamping
jaws, insufficient residual clamping stroke, incorrect actuating force, insuffi-
cient maintenance, wear, exceeding the service life), failure of device com-
ponents, in the case of insufficient clamping force, workpieces held by the
5-axle clamp can be ejected or fall.
Avoiding the hazard:
▪ All information in the operating manual on the 5-axle clamp must be ob-
served.
▪ Carry out a risk assessment for the machine with the integrated 5-axle
clamp and implement the derived safety measures.
2.6.4
Skin irritation due to operating materials
Description of the hazard:
Operating materials such as hydraulic oil, compressed air, lubricants etc.
can contain substances which can lead to skin irritation when touched.
Avoiding the hazard:
▪ Avoid contact with the operating materials
▪ Wear personal protective equipment when handling the operating ma-
terials
▪ Observe the safety data sheets of the operating materials
60 / 88
RVM DE-EN
Werbung
