Troubleshooting - Scheppach HL2200G Original Bedienungsanleitung

16. Troubleshooting

The table below contains a list of error symptoms and explains what you can do to solve the problem if your tool fails to
work properly. If the problem persists after working through the list, please contact your nearest service workshop.
Malfunction
The blade does not move
downwards or reach its
splitting force
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
Possible cause
Drive shaft speed incorrect
Drive shaft rotating in wrong
direction
Low oil level
One of the levers not connected
Dirt in the rails
Remedy
Check drive shaft speed
Check and adjust the direction of rotation
Check oil level and refill
Check fixing of lever
Clean the rails
GB | 27