Maintenance Interval Table; Cleaning The Air Filter - Parkside PBKS 53 B3 Originalbetriebsanleitung

GB

Maintenance Interval Table

Machine part
Components of the chain brake Check, replace if required
Sprocket chain wheel
(
27)
Saw chain (
9)
Saw chain (
9)
Guide bar (
9)
Guide bar (
9)
Oil automatic system
Coupling
Screws, nuts, bolts
Air filter
Spark plug (
35)

Cleaning the air filter

Never run the device without an air
filter. Dust and dirt may otherwise
enter the motor and cause damage to the
machine. Keep the air filter clean.
1. Switch off the engine and let the device
cool down.
2. Unscrew the screws (31) of the air filter
cover (32) and remove the air filter co-
ver (32) from the air filter housing.
52
Action
Check, replace if required
Check oil, regrind or re-
place if required
Clean and oil
Check, clean and oil
turn around
check and, where appropriate,
clean oil outflow duct
Check that the device is stati-
onary when idling
Check, tighten
Clean or replace
Clean/adjust/replace
3. Remove the air filter (33) from the air
filter housing.
4. Clean the air filter (33) with water and
allow it to air dry. Never use petrol
for cleaning!
"Spare parts/Accessories").
5. Place the cleaned (or new) air filter
(33) in the air filter housing.
Before After 10
every hours of
use operation






Replace the air filter (33) if it is
worn, damaged or dirty (see
After
every
use





