Safety Functions; Operation/Initial Start-Up - Parkside PBKS 53 B3 Originalbetriebsanleitung

magnetic field which, under certain
circumstances, may impair the
functionality of active or passive
medical implants. To reduce the risk
of serious or lethal injuries, we rec-
ommend that persons with medical
implants consult their doctor and
the manufacturer of their medical
implant before operating the ma-
chine.
A

Safety functions

4 Rear grip with hand guard (5)
Protects the hand against branches and
boughs in the case of springing away
by the chain.
12 Chain braking lever/
hand guard
Control system, which stops the saw
chain immediately in case of a spring-
back; lever can also be activated
manually; protects the left hand of the
operator if it slides from the front grip.
The motor cannot be turned on if
the chain brake has engaged.
9 Saw chain with small spring-back
Helps you to catch spring-backs with
specially developed control systems.
11 Metal stop claw
Reinforces the stability when vertical cuts
are carried out and facilitates sawing.
When sawing thick branches and
trees, use the chain catcher as a pivot
point if possible.
24 On-off switch
The device switches off immediately
when the on/off switch is pressed.
6 Throttle lever
The throttle lock must be unlocked in
order to switch on the device.
26b Chain catcher
Decreases the danger of injuries
chain breaks or if it comes off.
Operation/Initial
start-up
Always wear protective
gloves, protective goggles
( 20), hearing protection (
a safety helmet, safety shoes and
cut-resistant work clothes when
working with the saw chain. Befo-
re carrying out any work on the
petrol chainsaw, disconnect the
spark plug connector (
vate the chain brake. Risk of inju-
ry!
Dust may be generated when sa-
wing dry wood. Wear a suitable
dust mask.
Before putting the petrol chainsaw into
operation, you must:
- install the blade, saw chain and chain
cover where necessary,
- adjust the saw chain tension,
- pour in chain oil,
- check the function of the chain brake
and the automatic oil pump,
- check that the protective devices are
in perfect condition and complete and
that all screw connections are tight,
- check the tightness of the fuel system,
- make sure that the petrol chainsaw is
not touching anything.
Caution! The petrol chainsaw can
be re-oiled, see chapter "Mounting
the saw chain and blade bar".
(in the housing)
34)/acti-
GB
if the
21),
41