Technical Data - Parkside PBKS 53 B3 Originalbetriebsanleitung

13 Sprocket cover
14 Small screw
15 Nut
16 Blade protective cover
17 Combination tool
18 Oil bottle
19 Fuel mixing bottle
20 Protective goggles
21 Hearing protection
22 Choke
23 Fuel pump
24 On/Off switch
25 Screw
26a Coach screw
26b Chain catcher
27 Chain sprocket
28 Oil passage
29 Recess
30 Lug
31 Screw
32 Air filter cover
33 Air filter
34 Spark plug connector
35 Spark plug

Technical Data

Petrol Chainsaw ..................... PBKS 53 B3
Displacement ...............................53 cm
Max. engine power ......... 2.0 kW/2.7 HP
Engine speed at idle n
Engine speed with
Blade bar and saw chain n
Chain speed v
...................... 22.1 m/s
max
Weight, empty tank
without blade bar and saw chain.. 5.63 kg
with blade bar and saw chain ... 6.77 kg
Tank volume
Fuel ........................... 260 cm
Chain oil .................... 550 cm
.. 3000 ± 300 rpm
0
. 11500 rpm
max
(0.26 l)
3
(0.55 l)
3
Approved fuel ............... ROZ 95, ROZ 98
Fuel mixing ratio .............................40:1
Approved
Chain oil ................ ISO-L-EGD, JASO FD
Cutting length ...............................45 cm
Saw chain
Name .............. Kangxin 325.058x72DL
Max. speed ........................... 22.1 m/s
Pitch ........................ 8.25 mm (0.325")
Number of driving elements ..............72
Thickness of the drive links .......1.47 mm
(0.058")
Guide rail
Name ..............Kangxin BE18-72-5810P
Length........................................... 18"
Sprocket pitch .......................8.255 mm
Number of teeth (chain sprocket) ..........7
Emission sound pressure level at the user's
location .................. 104.9 dB; K
Sound power level (L
measured ......... 112.3 dB; K
guaranteed .............................. 115 dB
Wear hearing protection!
Vibration (a
)
h
Rear handle.. 10.387 m/s
Front handle ... 9.257 m/s
The carbon dioxide (CO2) emission value
determined by an EU type-approval proce-
dure for this appliance is: 1026 g/kWh
3
The vibration values were determined in
accordance with ISO 22867. The noise
emissions were determined in accordance
with ISO 22868.
Noise levels were determined according to
the norms and regulations in the declaration
of conformity.
GB
= 3 dB
pA
)
WA
= 2.37 dB
pA
; K= 1.5 m/s
2
2 ; K= 1.5 m/s
2
2
35