Maintenance Intervals; Maintenance Interval Table; Sharpening The Saw Chain - Parkside PKS 2200 A1 Originalbetriebsanleitung

GB MT

Maintenance intervals

Regularly carry out the maintenance oper-
ations listed in the following table. The life
of the saw is extended by regular main-
tenance of your chainsaw. Furthermore,
you get optimum cutting performance and
avoid accidents.

Maintenance Interval Table

Machine part
Components of the chain brake Check, replace if required
Sprocket chain wheel (
Saw chain (
5)
A
Saw chain (
5)
A
Guide bar (
4)
A
Guide bar (
4)
A
Oil automatic system

Sharpening the saw chain

An incorrectly sharpened
saw chain increases the dan-
ger of spring-back!
Use cut-protection gloves
when you are handling the
chain or the chain bar.
102
Action
24) Check, replace if required
Check oil, regrind or re-
place if required
Clean and oil
Check, clean and oil
turn around
check and, where appropriate,
clean oil outlow duct
Before
every
use





A sharp chain guarantees an op-
timal cutting performance. It eats
effortlessly through the wood and
leaves large, long wooden chips.
A saw chain is blunt if you have to
press the cutting equipment through
the wood and the wooden chips
are very small. In the case of a very
blunt saw chain, no chip cuttings
result at all, only sawdust.
After 10 After
hours of every
operation use


