Technical Data - Parkside PBKS 53 B3 Originalbetriebsanleitung

The optical class marking on your safety
goggles defines how long the safety
goggles can be used for and specifies the
maximum dioptre deviation.
These safety goggles belong to optical
class 1.
They are therefore suitable for long-term
use
Protection class:
Low energy impact
F
(6 mm ball at 45 m/s)
The mechanical strength of these safety
goggles has been verified by means of a
bullet test with a 6 mm steel ball at 45 m/s
and awarded protection class "F" for low
energy impacts.
Ear protector
This ear protector is designed for noise
protection during use in a domestic envi-
ronment.

Technical Data

Safety goggles ................... PAS001
Optical class ...................................... .1
Protection class .....................................F
Side shielding ....................................yes
Lens colour .....................Clear - not tinted
Material thickness in the centre ..... 2.2 mm
Product life ..................................3 years
Operating conditions ....Room temperature
Storage conditions .......Room temperature
Material
Lens ........................ Polycarbonate (PC)
Frame/Temples .............. Polyamide (PA)
Manufacturer identification... GRIZZLY TOOLS
Hearing protection .............PGS001
Size range ............... small/medium/large
Date of manufacture ................. 10/2022
Product life ..................................3 years
Material
Headband ...... Polyoxymethylene (POM)
Sealing pad .. Sponge / imitation leather
Average weight ............................ 145 g
Sound attenuation value for high frequen-
cies, H value ............................. 27.4 dB
medium frequencies, M value ... 18.7 dB
low frequencies, L value ........... 11.5 dB
SNR value (Single Number Rating) .. 21.6 dB
GB
11