Maintenance Intervals; Maintenance Interval Table; Storage; Waste Disposal And Environmental Protection - Parkside PKSA 20-Li C3 Originalbetriebsanleitung

GB

Maintenance intervals

Regularly carry out the maintenance opera-
tions listed in the following table. The life
of the saw is extended by regular main-
tenance of your chainsaw. Furthermore,
you get optimum cutting performance and
avoid accidents.

Maintenance Interval Table

Machine part
Components of
the chain brake
Sprocket chain
wheel (20)
Saw chain (7)
Guide bar (8)
Guide bar (8)
Automatic oil
system

Storage

• Clean the equipment before putting it
away.
• Put on saw bar protection sheath.
• Always empty the oil tank before pau-
ses in operation lasting several weeks
because the bio chain oil can become
resinous and block the oil outlet chan-
24).
nel (
Dispose of used oil in an environmen-
tally-responsible way (see „Disposal/
Environmental Protection").
• Store the appliance in a dry place well
out of reach of children
56
Action
Check, replace if required
Check for wear/indentations,
replace if necessary
Check oil, regrind or replace if
required
Check, clean and oil
Turn around
Check, clean oil aperture if
necessary
Before
every use





Waste disposal
and environmental
protection
Remove the battery from the device and
take the device, battery, accessories and
packaging for environmentally friendly
recycling. Instruction on how to dispose
of the rechargeable battery and charger
can be found in the separate instruction
manual.
Machines do not belong with do-
mestic waste.
After 10 hours
of operation
