Residual Risks; Further Safety Directions; Safety Functions - Parkside PKS 2200 A1 Originalbetriebsanleitung

GB MT

Residual risks

Even if properly operating and handling this
electric tool, some residual risks will remain.
Due to its construction and build, this elec-
tric tool may present the following hazards:
a) Cuts
b) Ear damage if working without ear
protection.
c) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
Warning! During operation, this
electric tool generates an electro-
magnetic ield which, under certain
circumstances, may impair the
functionality of active or passive
medical implants. To reduce the risk
of serious or lethal injuries, we rec-
ommend that persons with medical
implants consult their doctor and
the manufacturer of their medical
implant before operating the ma-
chine.

Further safety directions

• If the supply cord of this power tool is
damaged, it must be replaced by a spe-
cially prepared cord available through
the service organization.
• If it is necessary to replace the connec-
tion cable, we recommend that this be
performed by the manufacturer or an au-
thorised representative (e.g. authorised
workshop, customer service, etc.).
• Lay the extension cable in such a way
that it will not be caught by branches or
similar during sawing.
• Use a surge protector with a release cur-
rent of 30 mA or less.
94
• Comply carefully with maintenance, con-
trol and service instructions in this manual.
Damaged protective devices and parts
have to be repared or changed except
as noted otherwise in this manual.
• It is recommended that a irst-time user
at least practice the cutting of logs on a
saw log or frame.

Safety functions

1 Rear grip with hand guard
A
(10)
Protects the hand against branches
and boughs in the case of spring-
ing away by the chain.
3 Chain braking lever/
hand guard
Control system, which stops the
saw chain immediately in case of
a spring-back; lever can also be
activated manually; protects the
left hand of the operator if it slides
from the front grip.
The motor cannot be turned on if
the chain brake has engaged.
5 Saw chain with small
spring-back
Helps you to catch spring-backs
with specially developed control
systems.
17 Metal stop claw
Reinforces the stability when
vertical cuts are carried out and
facilitates sawing.
15 Electric motor
Double insulated for safety
reasons.
13 On-off switch with safety
chain brake
On releasing the On/Off switch,
the device immediately switches off.