Safety Functions; Technical Data - Parkside PKSA 20-Li B2 Originalbetriebsanleitung

11 Screw for the chain quick-ten-
sioning system
12 Sprocket cover
13 Oil level indicator
14 Rear hand protection
15 Blade encasing
16 Rechargeable battery
16a Battery release button
17 Charger
18 Oil bottle
19 Coach screw
19a Pin
20 Chain sprocket
21 Chain tensioner pin
22 Chain tensioner pin holder
23 Guide rails for battery
24 Oil passage

Safety functions

1 Rear grip with hand guard (14)
Protects the hand against branches and
boughs in the case of springing away
by the chain.
2 On-off switch with safety chain
brake
On releasing the On/Off switch, the
device immediately switches off.
3 Switch-on block
The switch-on block must be released
for switching on the device.
6 Chain braking lever/hand guard
Control system, which stops the saw
chain immediately in case of a spring-
back; lever can also be activated
manually; protects the left hand of the
operator if it slides from the front grip.
7 Saw chain with small spring-
back
helps you to catch spring-backs with
specially developed control systems.
9 Metal stop claw
Reinforces the stability when vertical
cuts are carried out and facilitates
sawing.

Technical Data

Cordless chainsaw .. PKSA 20-Li A1
Rated input voltage ....................20 V
Protection category...........................IPX0
Chain speed v ..........................6.5 m/s
0
Weight (without charger+
batteries) ....................... approx. 3.25 kg
Oiltank ...................................... 270 ml
Chain bar ...... Oregon 10" Double-Guard
............................................... 575271
Chain ....................... Oregon 90PX040X
Chain pitch .................. 3/8" (9.5 mm)
Chain link separation ............... 10 mm
Chain width ........................... 1.1 mm
Teeth of the sprocket chain wheel ....... 6
Length of the chain bar ............. 307 mm
Sawing length .............. approx. 230 mm
Temperature..........................max. 50 °C
Operation ......................... -20 - 50 °C
Storage ................................ 0 - 45 °C
Acoustic pressure level
(L ) ................85.0 dB(A); K
pA
Sound power level (L
measured .....93.9 dB(A); K
guaranteed ...........................98 dB(A)
Vibration (a ) at the
h
Front handle .... 1.41 m/s
Rear handle..... 3.97 m/s
Attention! An up-to-date list
of battery compatibility can
be found at:
www.lidl.de/akku
This device can be operated with the fol-
lowing rechargeable batteries: PAP 20 A1,
PAP 20 A2, PAP 20 A3.
GB IE
= 3.0 dB
pA
)
WA
= 2.40 dB
WA
; K= 1.5 m/s
2
; K= 1.5 m/s
2
35
2
2