KKT KOLBE EB8616TFT Benutzerhandbuch Seite 170

Installation and Fitting the Appliance
• Use the mains cable supplied for installation and only have
it replaced with one of the same type if necessary.
• Do not allow the oven's electric cable to come into contact
with hot surfaces, sharp edges or pointed corners and take
care not to pinch, kink or twist it.
• If the cable is damaged or needs to be replaced,
this must be done by a certified electrician using the cor-
rect tools to avoid danger.
• The use of adapters, multiple plugs or extension cables is
not recommended.
If absolutely necessary, adapters or extension cords that
comply with safety regulations may be used.
However, never exceed the maximum current capacity and
power specified for the adapter.
• After connecting the appliance, carry out a test by heating
the heating elements for 3 minutes.
82