General Safety Information - Checchi & Magli SP onion-Serie Bedienungs- Und Wartungsanleitung

General safety information

Read this manual carefully before proceeding with
any operations concerning use, maintenance or oth-
er work on the work vehicle.
Heed and comply with the symbols on the work vehi-
cle, especially those concerning safety.
To reduce risks of accidents as much as possible, the
tractor must be driven by a trained operators who is
able to coordinate the work of all the other staff in-
volved in the work.
The machine must only be put to the uses specified
by the manufacturer; misuse may cause safety and
health risks and could result in damage of a financial
nature.
Before using the work vehicle check that the guards
are all fitted correctly.
Before hitching the work vehicle up to the tractor,
make sure the tractor is in good condition.
Check that the work vehicle coupling to the tractor at
the third point of the hitch is securely locked so that
it cannot work loose.
During use, wear the personal protective equipment
and clothing envisaged by the laws in force on safety
in the workplace.
The operator is required to complete specific train-
ing prior to using the work vehicle.
The training must ensure that the work vehicle is
used properly, in relation to the dangers that could
be caused to both operators and others.
English language
SAFETY INFORMATION
The operator must assess the hazards present in
the specific use conditions envisaged, e.g., specif-
ic ground conditions (loose soil, slippery, sloping
ground, etc.) which require special precautions, and
it is up to the operator to take the necessary meas-
ures to eliminate or reduce these hazards.
In the event of a failure, do not carry out any repairs
on site unless you are certain that the area you are in
is appropriate and the equipment required is avail-
able.
It is more advisable to take the time needed to return
to the business premises rather than carry out repair
work in poor safety conditions.
When driving on the roads, the driver must comply
with the highway code, ensuring the tractor is road-
worthy and the relative signs to signal jutting objects
are affixed.
Maintenance and adjustment work must be carried
out with the work vehicle on flat, compact ground,
with the tractor engine off, parking brake engaged,
ignition key removed, and the work vehicle resting
on the ground.
Never leave the driver's seat when the tractor engine
is running.
Before leaving the tractor, lower the work vehicle
to the ground, stop the engine, engage the parking
brake, and remove the ignition key from the control
panel and store in a safe place.
7
3
Use and maintenance