Maintenance Information - Checchi & Magli SP onion-Serie Bedienungs- Und Wartungsanleitung

Inhaltsverzeichnis

Verfügbare Sprachen

Prolonged disuse of the work vehicle

If the work vehicle is not due to be used for long periods,

proceed as follows.

1) Wash the work vehicle completely.

2) Check the condition of the all the machine's parts

and replace any that are worn or damaged.

3) Repair any damaged or worn parts.

4) Check that the main fixing nuts and bolts are tight.

5) Check the lubricant level in the gearbox and if neces-

Safety advice for maintenance

Maintenance work must be carried out with the work

vehicle on flat, compact ground, with the tractor en-

gine off, parking brake engaged, and ignition key re-

moved, and adopting all the necessary safety meas-

ures required to work safely.

Any maintenance operations that can be carried out

on the business premises come under the ordinary

maintenance envisaged in the instruction manual.

Maintenance interval schedule

To guarantee constant, efficient and safe machine op-

eration, ensure all the maintenance envisaged by the

Interval

Component

Motorised digging shaft

Cutting discs

Rod conveyor

Every hour

Rear conveyor

Rod conveyor rollers

Rear wheels

Every day

Driveshaft

Transmission chain

Digging shaft chain

Every 50 hours

Nuts and bolts

Every 100 hours

Gear box

Every 2000 hours Gear box

English language

INFORMATION FOR USE

sary top up (see "Checking the gear box oil level").

6) Grease the parts that require lubrication (see "Lubri-

cation points diagram").

7) Park the machine carefully on flat ground in a dry

area protected from the weather.

8) Leave enough room around the work vehicle for the

hitching up and unhitching manoeuvres.