Checchi & Magli SP onion-Serie Bedienungs- Und Wartungsanleitung Seite 45

Adjusting wheels with cutting disc
Adjust the wheels with the cutting disc to increase or
decrease the depth the digging shaft reaches in the
ground.
Correct adjustment prevents damage to the crop to be
harvested.
Carry out the operations described.
1) Loosen the screw (C).
2) Move the clamp (A) to release the lever (B).
3) Rotate the lever (B) to lower the wheel and level out
the front of the machine.
4) Secure the lever with the clamp (A).
5) Tighten the screw (C).
6) Repeat the same procedure for the other wheel with
the cutting disc.
Adjusting rear wheel and compactor roller
Adjusting the rear wheels adjusts the tilt
of the rod conveyor to suit the working
depth.
Carry out the operations described.
1) Loosen the screw (D).
2) Move the clamp (A) to release the le-
ver (B).
3) Rotate the lever (B) to adjust the rear
wheel and compactor roller at the
same time.
4) Tighten the screw (D).
5) Adjust the other rear wheel in the
same way and by the same amount to
keep the compactor roller level with
the ground.
6) Use the lever (C) to raise or lower the
rear wheel with respect to the posi-
tion of the compactor roller to meet the needs dic-
tated by the kind of ground.
English language
ADJUSTMENT INFORMATION
A
C
UN41-0819LR
D
UN41-0820LR
11
B
C
5
B
A
Use and maintenance