Twist's Frontal Installation Kit - Central Linking System Klaxon - Klaxon TWIST Gebrauchsanleitung

9.4 TWIST'S FRONTAL INSTALLATION KIT - CENTRAL LINKING SYSTEM KLAXON®
A Crossbeam
B Locking Pins
C Clamping rings
D Connector
E Front Hook 2.0 Klaxon®
F Connector's lock/unlock lever
G Mounting system in the crossbeam (with ball type lock)
H Square seat for the insertion of the crossbeam
The Clamping rings (Figure 30 Letter C) are a component that remains mounted on the
wheelchair frame and cannot be installed/removed except by an authorised KLAXON dealer.
The Linking Systems can only be installed on compatible wheelchairs.
KLAXON provides to the distributors the Installation Manual which contains the coupling
criteria. The Linking Systems must be installed only by authorised KLAXON technicians who
may decide, under their own responsibility, if the specific wheelchair can be properly used
with that Linking System (according to both wheelchair features and its general condition).
KLAXON Mobility GmbH - EN
KLAXON TWIST device - End User's Manual (EN) - rev. 1.5 of 2023.02.08
Figure 30
29