Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2.
Retract the telescopic axle (Figure 49 Letter K) until it reaches its minimum extension. Do not tighten the
Clamping Lever before reaching step number 5 (Figure 50)
3.
Position the Rear Linking System Kit for foldable wheelchairs, at its minimum extension, between the
wheelchair's wheel axles (Figure 51).
4.
Extend the telescopic axle until it reaches the maximum possible extension between the wheels of the
wheelchair (Figure 52).
5.
Tighten the fixing lever to secure the telescopic axle in position (Figure 52).
6.
Check that the Kit is securely fixed to the pins/nuts of the wheelchair. The correct fixing position is
illustrated in Figure 53. Figures 54 and 55 show examples of incorrect positioning.
7.
In order to proceed with the TWIST connection please follow the instruction at chapter 12.
KLAXON Mobility GmbH - EN
Figure 53
KLAXON TWIST device - End User's Manual (EN) - rev. 1.5 of 2023.02.08
Step 5
Step 4
Figure 54
Figure 51
Figure 52
Figure 55
39
Werbung
Inhaltsverzeichnis
