Twist's Rear Installation Kit - Variant: Rear Linking System Klaxon® For Foldable Wheelchairs; Linking Steps - Rear Linking System Klaxon® For Foldable Wheelchairs - Klaxon TWIST Gebrauchsanleitung

9.6.1 TWIST'S REAR INSTALLATION KIT - VARIANT: REAR LINKING SYSTEM KLAXON® FOR FOLDABLE
WHEELCHAIRS
Rear Linking System Kit for foldable wheelchairs
H Rear Linking (described in details in Figure 47)
I Clamping Lever
J Crossbeam
K Telescopic Axle (recognisable by the presence of the Clamping Lever)
L Fixed Axle
The Linking Systems can only be installed on compatible wheelchairs.
KLAXON provides to the distributors the Installation Manual which contains the coupling
criteria and the possible configurations. The Rear Linking System Kit for foldable Wheelchair
can only be configured by authorised KLAXON technicians who may decide, under their
own responsibility, if the specific wheelchair can be properly used with the aforementioned
system (according to both wheelchair features and its general condition).
9.6.2 LINKING STEPS - REAR LINKING SYSTEM KLAXON® FOR FOLDABLE WHEELCHAIRS
Throughout the linking phase, make sure to be on a flat area, as free as possible of
unevenness in the terrain and away from dangers to the safety of the person and of others.
1. Unscrew the Clamping Lever (Figure 49 Letter I) by half a turn to release the telescopic axle (Figure 49
Letter K). (Figure 50).
38
KLAXON Mobility GmbH - EN
KLAXON TWIST device - End User's Manual (EN) - rev. 1.5 of 2023.02.08
Figure 49
Step 1
Step 2
Figure 50