2. Safety instructions
Hazard due to electric shock!
Before all work on the device, pay attention to the five safety rules in the following order:
• Disconnect from the supply of electrical power.
• Secure against switching back on.
• Check there is no electrical power present.
• Earth and short circuit.
• Cover or cordon off neighboring, electrically live parts.
Hazard due to work undertaken improperly!
Hazards will arise for persons and the device may be damaged by work undertaken im-
properly and unauthorized modifications to the device.
Spohn & Burkhardt will not accept any liability for damage caused by work undertaken
improperly or unauthorized modifications to the device.
We strongly recommend having all work on the device undertaken by Spohn & Bur-
khardt.
Crushing hazard!
During installation pay attention to sufficient distance to surrounding parts to avoid trap-
ping or crushing of the hand.
Danger!
Spare parts must comply with the technical standard specified by the manufacturer. Use
only original spare parts for your own safety.
Caution!
The correct function of the device must be checked each time before starting work.
Caution!
Make sure that an excessively high force cannot be applied to the joystick VCS0.
The joystick VCS0 is not allowed to be used to support the body or as an entry aid.
Caution!
While installing the joystick VCS0, make sure that ergonomic operation of the joystick
VCS0 is ensured.
Caution!
While installing the joystick VCS0, make sure that unintentional operation of the joystick
VCS0 is not possible.
54
Spohn + Burkhardt