Viking iMow MI 632 Gebrauchsanleitung Seite 130

4. Change PIN code
5. Start signal
6. Alarm signal
7. Menu signal
8. Keylock
9. Link iMow and dock
1. Disabling device:
The disabling device is activated
with OK; the robotic mower can no
longer be operated.
The robotic mower must be disabled prior
to any maintenance or cleaning work, prior
to transportation and prior to inspection.
( 5.2)
● To deactivate the disabling
device, press the illustrated
button combination (Mow button
and OK button).
2. Level:
Four safety levels can be set;
various locks and safety devices are
activated, depending on the level.
None:
The robotic mower is unprotected.
Low:
PIN code entry for linking the robotic
mower and docking station, as well as for
resetting the machine to the default
settings; time lock is active.
Medium:
Same as for "Low", however, settings can
also only be changed following entry of the
PIN code.
High:
Same as for "Medium", but an anti-theft
alarm is enabled as well as the PIN code
query.
128
VIKING recommends that the
"Low", "Medium" or "High" safety
levels be set.
● Select the required level and confirm
with OK; enter the 4-digit PIN code if
necessary.
Reset lock:
PIN code query prior to resetting the
machine to the factory defaults.
Connection lock:
PIN code query prior to linking of the
robotic mower and docking station.
Time lock:
PIN code query for changing a setting if no
PIN code has been entered for more than
one month.
Setting prot.:
PIN code query when settings are
changed.
Anti-th. alarm:
If the mower is lifted by the handle for
longer than 10 seconds, the PIN query
appears. If the PIN code is not entered
within one minute, an alarm sounds and
automatic operation is switched off.
3. GPS protect.:
(MI 632 C, MI 632 PC):
For switching position monitoring on
and off. ( 5.10)
VIKING recommends always
switching on GPS protection.
Before switching on, enter the
mobile phone number of the
owner in the app (
one of the safety levels "Low",
"Medium" or "High" on the robotic
mower.
4. Change PIN code:
The 4-digit PIN code can be
changed if required.
The "Change PIN code" menu item
is only displayed in the safety levels
"Low", "Medium" or "High".
● First enter the old PIN code and confirm
with OK.
● Then enter the new 4-digit PIN code
and confirm with OK.
VIKING recommends making a
note of the changed PIN code.
If the PIN code is entered
incorrectly 5 times, a 4-digit master
code is required, otherwise
automatic operation is switched off.
For the creation of a master code,
you must provide your VIKING
specialist dealer with the 9-digit
serial number and the 4-digit date,
which are displayed in the selection
window.
5. Start signal:
For switching on and off the acoustic
signal that sounds when the mowing
blade is activated.
6. Alarm signal:
For switching on and off the acoustic
signal that sounds when the robotic
mower hits an obstacle.
7. Menu signal:
To switch the acoustic click on or off
which sounds when a menu is
opened and a selection is confirmed with
OK.
10.) and set
8. Keylock:
When the keylock is switched on,
the buttons on the control panel
can only be operated if the Back
button is pressed and held and the
control pad is then pressed forwards.
The keylock is activated 2 minutes after
the last button has been pressed.
0478 131 9931 B - EN