Information - Viking iMow MI 632 Gebrauchsanleitung

11.9 Information

1. Messages:
List of all active errors, faults and
recommendations; shown together
with the times of occurrence.
During trouble-free operation, the text "No
messages" appears.
The message details are displayed by
pressing the OK button. (
2. Events:
List of the last activities of the robotic
mower.
Details of the events (additional text, time
and code) can be displayed by pressing
the OK button.
If certain activities occur too
frequently, your VIKING specialist
dealer will have further details.
Errors during normal operation are
documented in the messages.
3. iMow status:
Information on the robotic
mower
– Charge state:
Battery charge in percent
– Rem. time:
The remaining mowing duration during
the current week in hours and minutes
– Time and date
124
– Start time:
Start of the next planned mowing
operation
– Total number of completed mowing
operations
– Mowing hours:
Duration of all completed mowing
operations in hours
– Distance:
Total distance covered in metres
– Ser.-No.:
Serial number of the robotic mower.
This is also to be found on the
identification plate in the compartment
beneath the control panel.
– Battery:
Serial number of the battery
– Software:
Installed machine software
24.)
4. Lawn status:
Information on the lawn
– Mowing area in square metres:
This value is entered during initial
installation or new installation (
– Round time:
Duration of one circuit around the
mowing area in minutes and seconds
– Starting points 1 – 4:
Distance of the relevant starting point
from the docking station in meters,
measured in a clockwise direction
( 11.14)
– Circumference:
Circumference of the mowing area in
metres
– Edge mowing:
Frequency of edge mowing per week
( 11.14)
5. Radio module status
(MI 632 C, MI 632 PC):
Information on the radio module
– Satellites:
Number of satellites within range
– Position:
Current position of the robotic mower;
available if the satellite connection is
strong enough
– GPRS:
Signal strength of the mobile radio
connection; the more plus characters
shown (max. "++++"), the better the
connection
– Network:
Network ID, comprising country code
(MCC) and provider code (MNC)
– Mobile phone number:
Mobile phone number of the owner; is
entered in the app (
– IMEI:
Hardware number of the radio module
– IMSI:
International mobile subscriber identity
9.4)
– Contr. until:
Expiry date of the current M2M service
contract
– SW:
Software version of the radio module
– Ser.-No.:
Serial number of the radio module
10.)
0478 131 9931 B - EN