First Mowing Operation After Initial Installation - Viking iMow MI 632 Gebrauchsanleitung

MI 632 C, MI 632 PC:
To be able to use all the functions of the
robotic mower, the VIKING iMow app
must be installed on a smartphone or
tablet with an Internet connection and GPS
receiver, and started. ( 10.)
Close the dialog window by pressing
the OK button.
9.12 First mowing operation after initial
installation
If completion of initial installation occurs
during an active time, the robotic mower
will begin to mow the mowing area
immediately.
0478 131 9931 B - EN
If completion of the initial installation
occurs outside the active time, a
mowing operation can be started by
pressing the OK button. If you do not wish
the robotic mower to mow, select "No".
10. VIKING iMow app
The MI 632 C, MI 632 PC models can be
operated using the VIKING iMow app.
The app is available for all popular
operating systems in respective app
stores.
The regulations in the section "For
your safety" apply in particular to all
users of the VIKING iMow app.
( 6.)
Activation:
In order for the app and robotic mower to
be able to exchange data, the machine
must be activated with the owner's e-mail
address by the VIKING specialist dealer. A
code and activation link are sent to the e-
mail address.
The VIKING iMow app should be installed
on a smartphone or tablet with an Internet
connection and GPS receiver. The e-mail
receiver is defined as the administrator
and primary user; this person has full
access to all functions.
Keep the e-mail address and
password safe so that the VIKING
iMow app can be reinstalled should
the smartphone or tablet be
changed (e.g. if the mobile phone is
lost).
Data traffic:
Data transmission from the robotic mower
to the Internet (M2M service) for 3 years is
included in the purchase price. Before the
contract expires, a reminder is shown on
the display and in the app; a subsequent
contract is available from the VIKING
specialist dealer.
Data transmission does not take place
continuously and can therefore take a few
minutes.
117