Identification Data; Device Identification Label; Handpiece Identification Data - mectron Piezosurgery flex Gebrauchs- Und Wartungsanleitung

2 IDENTIFICATION DATA
A precise description of the model and device serial number will facilitate the After-Sales Service
to answer the inquiries quickly and effectively.
Always provide this information when contacting an Authorised Mectron Service Centre.
2.1 Device Identification Label
Every device has an identification
label that reports the main technical
characteristics and the serial number.
The identification label is located under
the device. The complete technical
specifications are reported in
on page 26 .
A separate label shows further symbols
and characteristics of the device. This
identification label is placed under the
device.
NOTE: The complete list of symbols and
their description are shown in
1.5 on page 6 .
2.2 Handpiece Identification Data
Each handpiece is laser-marked with (refer to
• its serial number (SN);
• its product number (REF);
• its date of manufacturing;
• the device name (PIEZoSURGERY®
medical);
• the Mectron logo;
• HIBC 128 Data Matrix;
• CE, MD, Applied Part and Sterilizable
symbols.
NOTE: The complete list of symbols and their
description are shown in
6.
8
flex
Chapter 8
Chapter
Figure 1 at page 9
Chapter 1.5 on page
manufacturer
Mectron S.p.A.
Via Loreto 15/A
16042 Carasco -GE- Italy
PIEZOSURGERY flex
~
100-240 V 120 VA - 50/60 Hz.
00000000
YYYY-MM-DD
413000000
HIBC 128 Bar Code
PIEZOSURGERY flex
Device for intermittent operation:
60 s ON - 30 s OFF with irrigation
):
0051
made in Italy