Delivery; List Of The Components Of The Piezosurgery® Flex - mectron Piezosurgery flex Gebrauchs- Und Wartungsanleitung

3

DELIVERY

3.1 List of the Components of the PIEZOSURGERY® flex
Refer to the front endpaper.
PIEZOSURGERY® flex consists of:
A. Device core system;
B. Peristaltic pump;
C. Stand for Solution Bag;
D. Use and Maintenance Manual, Cleaning
and Sterilization Manual;
E. Power Cord;
F. Foot Pedal with bracket, cable and
connector;
G. Case.
Available accessories:
H. PIEZoSURGERY® medical handpiece
complete with cord and the connector
protective cap (produced by Mectron);
CAUTION: The handpiece and the cord
cannot be separated.
I. PIEZOSURGERY® medical single-use
inserts (produced by Mectron);
J. PIEZoSURGERY® medical single use
irrigation kit (distributed by Mectron);
K. PIEZoSURGERY® medical torque
wrench (produced by Mectron).
10
flex
PIEZOSURGERY® flex consists of accessories
that can be ordered separately.
The packaging of the device cannot undergo
strong
components, therefore the transport and the
storage must be carried out with particular
care. All material shipped by Mectron is
controlled at the time of dispatch.
The device is shipped appropriately protected
and packaged.
Upon receipt of the device, check for any
possible damage caused during transport and
in case any damage and/or defects is found,
complain to the transporter.
Keep the packaging in case there is a necessity
to send any item to a MECTRON Authorized
Service Centre and to store the device during
long periods of inactivity.
WARNING: Before starting to operate
with the device, make sure that you have
stock material (handpiece, inserts, wrenches)
available to use in case the device stops due
to a fault or of inconveniences.
impacts as contains electronic