Functional Description / Layout; Functional Description; Setup - ECOLAB ECOPLUS S series Betriebsanleitung

4

Functional description / Layout

4.1

Functional Description

As soon as the relevant release signal is issued by the DW (dish washer), throughout the
entire cleaning process, the concentration of cleaning solution is measured continuously
by an inductive conductivity measuring cell in the main tank of the commercial dishwasher
(hereinafter known by its German abbreviation of DW).
The concentration of cleaning agent is monitored by the control unit.
As soon as the concentration drops below the desired figure, further dispensing is
enabled.
The solid capsule is sprayed from below with cold or hot water.
The solution is dispensed into the dish washer and the concentration of cleaning agent is
measured in the tank.
When the nominal concentration is reached, dispensing ends.
On devices with an integrated clear-rinse pump, this is activated either proportionally or in
a time-controlled manner.
4.2

Setup

417102228_Ecoplus-S
Fig. 4.1
No.
1
2
3
4
5
6
7
- 31 -
Description
Funnel
ECOPLUS S
(electronics module)
(example: Ecoplus SD)
Funnel lock unit
Connection piece
Water connection
Dish Washer feed hose
Overflow line
Rev 01-08.12