Inhaltsverzeichnis
Werbung
2
FUSE INSPECTION
6. Install:
G
G
7. Connect:
G
CAUTION:
First, connect the positive lead 1, then the
negative lead 2.
8. Check:
G
9. Lubricate:
G
10. Install:
G
EAS00181
FUSE INSPECTION
CAUTION:
To avoid a short circuit, always set the
main switch to "OFF" when checking or
replacing a fuse.
1. Remove:
G
G
2. Check:
G
1
Checking steps:
Remove the fuse 1.
G
Connect the pocket tester to the fuse and
G
check the continuity.
NOTE:
Set the pocket tester selector to "Ω × 1".
If the pocket tester indicates "∞", replace
G
the fuse.
2 Reserve fuse
3 - 56
INSP
ADJ
Battery
Battery band
Battery leads
(to the battery terminals)
Battery terminals
Dirt → Clean with a wire brush.
Loose connection → Connect properly.
Battery terminal
Recommended lubricant
Lithium soap base grease
Seat
Seat
Fuse cover
Continuity
Pocket tester
YU-3112-C/90890-03112
Werbung
Inhaltsverzeichnis
