Cable Routing Diagram - Yamaha WR450F 2004 Fahrer- Und Wartungshandbuch

EC240000

CABLE ROUTING DIAGRAM

1 Fuel tank breather hose
2 Clamp
3 Diode
4 Wire harness
5 Hot starter cable
6 Negative battery lead
7 Starter motor lead
8 TPS (throttle position sen-
sor) lead
9 Neutral switch lead
0 Oil hose
A Hose holder
B Radiator hose 4
C Cylinder head breather hose
D AC magneto lead
E Radiator hose 1
F Oil tank breather hose
CABLE ROUTING DIAGRAM
G Brake hose
H Hose guide
I Carburetor breather hose
J Overflow hose
K Coolant reservoir tank breather
hose
Å Insert the fuel tank breather
hose into the hole in the steering
shaft cap.
ı Fasten the diode of the wire har-
ness and rectifier/regulator lead
(at its protecting tube) to the
frame at the white tape for the
diode with a plastic locking tie
and cut off the tie end.
2 - 23
SPEC
Ç Fasten the wire harness, recti-
fier/regulator lead, coolant res-
ervoir hose and hot starter cable
to the frame with a plastic lock-
ing tie and cut off the tie end.
Î Fasten the wire harness, recti-
fier/regulator lead and coolant
reservoir hose to the frame with
a plastic locking tie and cut off
the tie end.
‰ Fasten the wire harness to the
frame at its white tape with a
plastic locking tie and cut off the
tie end.