Qualification Of Personnel; Target Group - Optimum Optidrill DX 13V Betriebsanleitung

In the event of improper use

there may be a risk to personnel,

there may be a risk to the machine and other material values,

the correct function of the drilling machine may be affected.
Always disconnect the drilling machine if cleaning or maintenance work is being carried out, or
is no longer in use.
WARNING!
The drilling machine may only be operated with functional safety devices.
Disconnect the drilling machine immediately, whenever you detect a failure in the safety
devices or when they are not fitted!
All additional devices installed by the operator must be equipped with the stipulated
safety devices.
This is your responsibility as the operator!

Safety devices on page 41
1.6

Qualification of personnel

1.6.1

Target group

This manual is addressed to

operators,

users and

maintenance personnel.
Therefore, the warning notes refer to both, operation and maintenance personnel of the drilling
machine.
Lock the main switch. This will prevent it from being used by unauthorized persons.
Obligations of the operating company

train the personnel,

instruct the personnel in regular intervals (at least once a year) on
- all safety regulations relevant to the machine,
- its operation and
- generally accepted engineering standards.

check the personnel's knowledge level,

document the training/instruction,

have attendance at the training/instruction confirmed by signature and

check whether the personnel is working in a safety and risk-conscious manner and follow-
ing the operating instructions.

define and document the inspection deadlines for the machine in accordance with § 3 of the
Factory Safety Act and perform an operational risk analysis in accordance with § 6 of the
Work Safety Act.
Obligations of the operator

have obtained a training regarding the handling of the drilling machine,

know the function and mode of action,

before taking the machine in operation
- have read and understood the operating manual,
- be familiar with all safety devices and instructions.
Additional requirements apply for work on the following machine components:

Electrical parts or operating agents: shall only be performed by an electrician or under the
guidance and supervision of an electrician.
EN DX13V | DX15V
40 Originalbetriebsanleitung
Safety
Version 1.0.4 - 2021-08-30