Qualification; Private Users; Obligations Of The User; Craftsman Or Industrial Use - Optimum OPTIdrill D 17Pro Betriebsanleitung

All additional devices installed by the operator must be equipped with the stipulated
safety devices. This is your responsibility as the operator!

Safety devices on page 68
1.6

Qualification

It is indispensable that the operator is suitably qualified for safe use and secure setting and
operation of the machine.
1.6.1

Private Users

The drilling machine is also used in the private domain. The acumen of people in the private
sector with training in metal working was taken into consideration for creating this operation
manual. Vocational training or further instruction in a metal working profession is a prerequisite
for safe operation of the machine. It is essential that the private user is aware of the dangers
involved in operating this machine.
1.6.2

Obligations of the User

The user must
have read and understood the operating manual,

be familiar with all safety devices and regulations,

be able to operate the drilling machine.

1.6.3

Craftsman or industrial use

This manual is addressed to
the operating companies,

the operators,

the maintenance personnel.

Therefore, the warning notes refer to both, operation and maintenance personnel of the drilling
machine.
WARNING!
Always disconnect the drilling machine from the electrical power supply. This will prevent it from
being used by unauthorized persons. The qualifications of the personnel for the different tasks
are mentioned below:
Operator
The operator has been instructed by the operating company regarding the assigned tasks and
possible risks in case of improper behaviour. Any tasks which need to be performed beyond the
operation in standard mode must only be performed by the operator, if so indicated in these
instructions and if the operator has been expressively commissioned by the operating com-
pany.
Qualified electrician
With professional training, knowledge and experience as well as knowledge of respective
standards and regulations, qualified electricians are able to perform work on the electrical sys-
tem and recognise and avoid any possible dangers. Qualified electricians have been specially
trained for the working environment, in which they are working and know the relevant standards
and regulations.
Qualified personnel
Due to their professional training, knowledge and experience as well as knowledge of relevant
regulations, qualified personnel are able to perform the assigned tasks and to independently
recognise and avoid any possible dangers.
Safety
Version 1.0.3 - 2022-04-06 Translation of original instruction
D17 Pro│D23 Pro│D26 Pro│D33 Pro EN
67